Participants 2019

is a leading Romanian car manufacturer, a subsidiary of the French car manufacturer Renault. The Dacia manufacturing plant in Mioveni, Arges County is currently Europe’s fifth biggest car manufacturing facility in terms of volume produced with a total of over 550 000 units (cars and CKD kits) delivered worldwide.
Ford Motor Company, a global automotive industry leader based in Dearborn, Michigan, manufactures and distributes automobiles across six continents. With about 187,000 employees and 62 plants worldwide, the company’s automotive brands include Ford and Lincoln.
Star Transmission (Daimler)
is part of the German group Daimler. The company was founded in 2001 and now it has more than 2.600 employees. Star Transmission produces parts through soft and hard machining processes, including heat treatment, galvanizing and assembling. The company services include: cutting, turning, drilling, milling, cold rolling, finishing and resistance sandblasting.
is one of the leading automotive suppliers worldwide, offering brake systems, systems and components for powertrains and chassis, instrumentation, infotainment solutions, vehicle electronics, tires, and technical elastomers. The company contributes to enhanced driving safety and global climate protection, and is also an expert partner in networked automobile communication.
is a world market leader in gas struts and hydraulic vibration dampers, with expertise in linkage systems: automobile and furniture industries, housing and building technology and medical products as well as rehabilitation technology. The company gas struts, dampers, and electric drives allow to optimize opening, closing, lifting, lowering, damping, and adjusting actions.
TE Connectivity
is a world leader in connectivity, which designs and manufactures solutions that connect and protect data and power. The company operates in more than 150 countries in a variety of industries including automotive, data communication systems, consumer electronics, telecommunications, aerospace, defense and marine, medical, energy, and lighting.
Wipro Infrastructure
is a multi-faceted and diverse industrial engineering business with expertise spanning over Hydraulics, Aerospace, Water treatment, Additive manufacturing and Automation Solutions with state-of-the-art manufacturing facilities across India, Israel, Sweden, Finland, Romania, USA and Brazil. Wipro is one of the largest independent hydraulic cylinder manufacturers in the world, delivering over a million cylinders to OEMs annually.
Sysmec division- part of VAT Group Switzerland is a company with activities in the supply industry and manufacturing of machined parts, mechanical components and assemblies in medium series, as well as metal processing. We are the largest metal processor in Western Romania - serving automotive & high-tech markets.
Jaeggi Industries
We are one of the world’s largest manufacturers of refrigeration components and air conditioning technology. Güntner Group Europe GmbH has its headquarters in Fürstenfeldbruck, Germany, and is the cross-brand holding company for Güntner GmbH & Co. KG, thermowave Gesellschaft für Wärmetechnik mbH, JAEGGI Hybridtechnolgie AG, and basetec products + solutions GmbH for the EMEA region (Europe/Middle East/Africa).
Makita Manufacturing Romania
Production and assembly of electric power tools, woodworking machines, pneumatic tools, gardening equipment and household equipment. The Romanian factory, is the 2nd largest one in the Makita Group, with more than 1,600 employees working in over 50k m2 (expanding to 93k m2 in less than 6 months), obtaining approximately 400k tools per month. We are constantly hiring and looking for European suppliers as we are expanding and demand is growing.
Marquardt Schaltsysteme
We are a leading manufacturer in the field of electro-mechanical and electronic switches and switching systems. Our products are used by many well-known automobile manufacturers and our systems are also found in household appliances and other industrial applications. In the field of power tool switches, we are the global market leader.
IFM Efector
Since the foundation in 1969, IFM has developed, produced and sold sensors, controllers and systems for industrial automation worldwide. Today the IFM group has more than 6,000 employees in 70 countries and it is one of the worldwide industry leaders. IFM has a large product portfolio: position and process sensors, sensors for motion control and safety technology, products for industrial imaging and communication, as well as identification systems and systems for mobile machines.
Voestalpine Automotive Components
is a leading technology and capital goods group with combined material and processing expertise, holding global top positions in its business units. The Group focuses on product and system solutions based on steel and other metals of the highest quality in technology-intensive industries and niches.
is one of the biggest integrated industrial processors in Central and Eastern Europe, with world class capabilities. The company develops the production of molds and parts for the production of plastic injection, providing also drilling components, compliance, assembly and installation, packaging, decoration pieces; metal processing - aluminum and carbon, rolling, debiting, jointing, machining, brushing, turning, milling, pressing, draping, polishing.
Uzina Automecanica Moreni
Uzina Automecanica Moreni is part of the military industry in Romania, the main specific activity is the production of Armored Personnel Carriers on wheels. Products manufactured at UAM have participated in many security and stability missions, peacekeeping and public order missions in different countries. Following the general trend of reconversion of the military industry, the Moreni plant has also been involved in the production of civilian products and the development of a wide range of services.
Prysmian Cabluri si Sisteme
Prysmian Group is the worldwide leader in energy and telecom cable production. We offer one of the most complete and extensive product ranges in the world. And we’re always evolving to meet the needs of our customers, enhancing operations and boosting profitable growth.
Martur Automotive Seatings and Interiors
Martur is engaged in the design, manufacture, assembly and supply of motor vehicle seats and their components. Martur is a member of a group of companies that supply high quality products to the automative industry. With R&D and design offices in multiple locations in Europe, Martur continues to set the standards for the industry.
Advanced Comfort Systems
is an Automotive Tier 1 supplier, subsidiary of an international industrial group, a leading company in the design and manufacturing of luggage covers, roof systems, shading and glazing systems, with mission to optimize comfort of transportation by creating and supporting tomorrow’s concepts to reinforce user well-being.
Joyson Safety Systems
Joyson Safety Systems is a global leader in mobility safety providing safety-critical components, systems and technology to automotive and non-automotive markets. Joyson Safety Systems is headquartered in Auburn Hills, Michigan, USA, with a global network of more than 50,000 employees in 25 countries. It is a subsidiary of Ningbo Joyson Electronic Corp. (SHA: 600699, “Joyson Electronics”).
ZF Hungaria
ZF is a global leader in driveline and chassis technology as well as active and passive safety technology. The company has a global workforce of 146,000 with approximately 230 locations in some 40 countries.With its broad portfolio, ZF is advancing mobility and services for passenger cars, commercial vehicles and industrial technology applications. The ZF Hungária Ltd. produces 5 / 6 / 8 speed manual/automatized/automatic shifted transmissions for commercial vehicles and personal cars.
The De’Longhi Group is present in 33 countries with direct commercial subsidiaries and sells its product to countries all over the world, remaining committed to creating innovations that bring convenience and style into every customers' home making the everyday better.
BOS Automotive Products
As a worldwide company, BOS develops, manufactures and distributes innovative systems and components for the automotive industry. BOS expertise include sun protection system, luggage cover systems, load restrain systems, roof and roof shading, load through devices, armrests and center consoles, cargo management, carrier systems, plastic parts and modules, wind stops and bags.
Kendrion Industrial
Kendrion develops, manufactures and markets worldwide high-quality electromagnetic and mechatronic solutions for industrial applications. As a leading technology pioneer, Kendrion invents, designs and manufactures complex components and customized systems as well as local solutions on demand.
is a leading global supplier which provides solutions for comfort and safety in automotive, aerospace, and other industries. Hutchinson in Romania was built in 2007 for the manufacture of rubber parts for the automotive industry (production area 10 000 sqm). Through specific manufacturing processes it offers solutions for: precision sealing, car boy sealing, anti-vibration systems, providing innovative solutions to new challenges of the automotive industry. Among Hutchinson’s customers we mention: Dacia-Renault, Ford, Mercedes, Mahle, Bosch, Valeo, ZF, Behr.
Zoppas Industries Romania
Zoppas Industries Heating Element Technologies is a reliable global supplier for the design, manufacture and sale on the world market of heating elements and systems for domestic and industrial use.
Simea (Siemens)
Our field of activity is the manufacturing of low-voltage electrotechnical equipment's, such as: automatic switches, differential and safety switches, relay and switch fuses, command and control equipment for the world market. We are also a supplier of sub assemblies generally made by spot welding for other factories in the division that are located in Turkey, India or Brazil.
ZES Zollner Electronic
Zollner AG was founded in Zandt, Bavaria, in 1965, and is still a 100% family-owned corporation today. The company established itself worldwide as one of the top 15 EMS service providers in the realm of mechatronic services.
Thyssenkrupp Bilstein
Thyssenkrupp Bilstein is developing an producing successful dampers.
The Schaeffler Group is a global automotive and industrial supplier. Top quality, outstanding technology, and exceptionally innovative spirit form the basis for the continued success of the company. By delivering high-precision components and systems in engine, transmission, and chassis applications, as well as rolling and plain bearing solutions for a large number of industrial applications.
Mitsubishi Electric
Mitsubishi Electric Europe has been a driving force in industry automation technology in Europe for more than 40 years. The brand is synonymous with innovative, high-quality industry automation solutions – based on products such as programmable logic controllers (PLCs), CNC controllers, servo control systems, industrial robots, HMIs and software solutions.
is one of the main Romanian producers of electrical cables, control cables, brake and clutch, for motor vehicle, cords and leads, insulated, electric, with moulded-on plugs, cable assemblies, wiring harnesses/looms and cable connector assemblies.
is a subsidiary of Jacquemet Group, which is specialized in metal assemblies and springs since 1926, offering a global solution for wire metal strips and tube conversion through processing and manufacturing wire springs of all types: torsion, compression, traction and flat.
Euro Sandow
is one of the leading producers for custom made elastic nets, shock cords, bungee cords, elastic straps, luggage and floor nets for a wide variety of securing applications. Most of the products are designed for the automotive industry as a 2nd tear supplier.
Anorom Company is specialized in the treatment of aluminium and aluminium surfaces. The surface treatments which Anorom performs are suitable both for the bright pieces of a laminated material and for the cast pieces.
Edorom Metal
Component of DEKEM group with two other companies located in two powerful industrialized areas of France, Edorom Metal Romania provides metal products obtained by cold plastic deformation (stamping,cutting, drawing). We have automatic presses (from 40 to 250 T) and we work with progressive tools mainly (bending and assembly too). Raw materials have thickness: 0,3 to 4 mm (steel, stainless steel, copper, bras, galvanized steel etc).
MDE Converting
MDE Converting is a global leading company specialized in adhesive tapes processing and adhesive tapes personalization for automotive industries, home appliances and others industries. For the past 10 years, MDE Converting has been providing adhesives, adhesive tapes, label materials, removable assembling systems, die-cutting, design and manufacturing.
With over 60 years of experience in cable protection, the Schlemmer Group develops, produces and sells matured systems for the Automotive Industry and Appliances divisions. From corrugated tube extrusion through lightweight processes to precision injection moulding, Schlemmer company has become one of the leading value added partners in fastening technology and plastic solutions.
DC Technology
DC Technology offers a wide range of innovative and cost saving equipment for the industry. The company range of products and services includes LED technology equipment, measuring and control devices that have multiple applications for automotive industries, railway, constructions, heavy industrial, home appliances, renewable energy and other industries.
Inmaacro is the technical and commercial representative of companies from Germany, Switzerland, Holland, Italy and Taiwan which are producers of machine tools, measuring and control machines, cutting tools, accessories and software.Also, the company manufactures custom made tools, custom made clamping devices for machine tools and coordinate measuring machines, molds, precision parts, automation.
META Sisteme de rafturi
META Sisteme de Rafturi SRL products are CLIP and FIX shelving systems, MINI-RACK and SPEED-RACK widespan racks, MULTIPAL pallet rack, Cantiliever, Multitier and Multipurpose shelving systems. We have been involved in metal working processes for more than 120 years, with our "Made in Germany" quality seal, we don't just want to recruit people, we also feel it is a duty and a requirement to provide you with quality products, now and in the future.
Mold-Masters Europa
Mold-Masters is the global leader in melt delivery and control systems. Since 1963, the company designs and manufactures the plastic industry’s’ most advanced hot runner systems, temperature controllers and auxiliary equipment. With manufacturing and sales facilities in the Americas, Europe, India and Asia, Mold-Masters spans the globe with its capabilities. Mold-Masters is a proud member of the Milacron family of brands.
Osma Plast
We are a company of 160 employees, specialized in plastic injection, assembly, and plastic plating. We are certified in ISO 9001:2015 and ISO 14001: 2015. We have 25 injection machines in a range from 0 - 1000 T, and besides injection we have secondary capabilities including: tamp-printing, hot foil, plastic welding and inserts.
Kvalix Automatika
Kvalix Automatika is a competent partner in factory automation. Located in Hungary and Romania, Kvalix Automatika is distributor of sensors and controllers for industrial automation, designs and produces special purpose inspection and assembly machines, and performs precise and quality machining of custom and small series metal and plastic parts.
For more than 80 years, Rösler has been offering an extensive portfolio in the world of mass finishing systems, shot blasting, consumables and services. Rösler is the world's only provider of surface treatment services, the two essential technologies - vibrating and sanding - in combination with industrial washing equipment, also creating and producing all the components.
Lubricant RO Oil
Lubricant Sro is a company specialized in technical fields, which has been operating on the markets in Czech Republic since 1993. The company is present on the Romanian market through Lubricant RO Oil starting with 2015. LUBRICANT is not just a supplier but we have also a range of our own products, so we are also a manufacturer. Among the products offered by our company there are: special lubricants, plastic lubricants, lubricants for medical and food industry, solutions for machining, forming and stamping, emulsions, plastics injection products, biodegradable lubricants, industrial oils, oils used in the automotive field. We have also our own certified laboratories: one in Czech Republic other in Germany.
AC Spolka Akcyjna
AC S.A. is the Polish provider and a major global producer and designer of wire harnesses and electronic devices (EMS) mainly for the automotive industry (incl. comple autogas systems). Company has 30 years of experience, around $50 million turnover annually, more than 850 employees. Our product offer, currently used by 5 million drivers, is available in more than 50 countries around the world. We operate our own R&D Centre with 60 engineers.
Savoy Moulage
Founded in 1982, the first entity of Savoy International group had initial activity for the plastics industry. The group specialized in the manufacturing of plastic parts and assemblies, as we know it, today is the result of a significant growth, particularly outside. This growth, desired by its founder, aims to diversify the activities to meet the demand of its customers by providing a competitive advantage and product solutions/innovative process in a competitive sector.
AXA Entwicklungs- und Maschinenbau
AXA's focus is on development, construction and manufacturing of travelling column and gantry machining centres and tailor-made production systems. Regardless whether you are looking for complete solutions for customers in large scale industry, special solutions for efficient manufacturing in smaller suppliers or entire system solutions for complex challenges: Our machines are perfectly tailored to the individual requests of our customers.
is an industrial producer of plastic protective elements and other technical parts made out of plastic. Since 1949, the family-owned company, with its five production sites and 550 injection moulding machines, thermoforming lines and extruders, has grown into a leading manufacturer in the plastics processing industry. Pöppelmann has over 2,000 highly-qualified employees and customers in over 90 countries.
AAGES SA from Sângeorgiu de Mureș designs and produces a large range of induction heating equipment, used in different areas of industrial applications: induction hardening, melting in coreless and channel furnaces, mass heating for metal forming by pressing, forging, rolling, stamping and extrusion, heating for brazing, heating for shrink fitting. The company also produces sub-assemblies: IGBT converters, inductors, MF transformers and chokes.
West Air Grup
We are one of the most known companies in Romania for clean, green and intelligent cooling and ventilation solutions for any size of industrial halls. The innovative direct and/or indirect evaporative cooling technologies can provide power consumption up to 5 times lower than conventional solutions and remarkable efficiency with no refrigerants and no compressor.
is a Romanian company based in Oradea, with branches in major cities from the country: Baia Mare, Timisoara, Brasov, Bucharest and Iasi. The company started its activity in 1996 in the garment industry and then expanded to several industries. Novatex provides a full range of industrial accessories; household accessories and geosynthetic materials to meet the needs of all customers. Taking advantage of their experience of over 15 years, the company offers competence and up-to-date solutions.
Lankwitzer Lackfabrik
As a premium label for coating systems Lankwitzer is the international leader in many fields of industrial applications. Our laboratories excel by innovation power and excellent competence in the development of future oriented coating systems. Highest professionalism from the stage of development to the production as well as passion for the fascinating potential of modern coating systems are our prerequisites to successfully be the leading brand.
Mitutoyo is one of the world's leading manufacturer of precision measuring equipment, offering a huge range of products from micrometers, calipers and dial gauges to hardness testers, vision measuring systems and 3D coordinate measuring machines from sales offices in more than 40 countries, supported by aftersales representation in more than 100 countries.
GreenBau Tehnologie
GreenBau Tehnologie is the supplier for Okuma, Citizen, Brother CNC Machines Japan and Hedelius CNC Germany. Our offer includes manufacturing technology, know-how, training for operators, programming and maintenance personnel for Okuma, Citizen, Brother and Hedelius CNC Machines, service, waranty and post-waranty for Okuma, Citizen, Brother and Hedelius CNC Machines, integration of robots with CNC Machines.
Pladent has a long-lasting tradition in converting of adhesive tapes, foams, felts etc. Fast sampling, small series and short production times are what differs us from others. Our products are used in automotive industry, home appliances, etc. They are used for sealing, dumping, protection (dust, water, mechanical damage). Our products can be used for joining different materials and surfaces, sound and vibration isolation.
Polipack has more than 28 years experience in the design, development and production of blow molded and extruded technical plastic parts, a strong position in technical parts blow moulding and extrusion. Among our products are oil tanks, freezer components, electric water heaters tank, drying machine components, edge protectors, gardening or power tools components, corrugated tubes, rigid wall tubes, cable ducts, profiles, seatings for stadiums.
EMC Distribution
EMC Distribution is Bulgaria’s leading producer of precision and construction electro-welded steel, pre-galvanized and aluminium tubes and profiles, sheets, hot dip galvanization, powder coating and producer of components. A company with over 24-years experience, a well-established market presence, European quality production and high level of professionalism in all departments.
Ro-mega Trade
Ro-Mega Trade represents in Romania is world well-know companies in machine tools business Doosan & Quality Control Business: Mahr, Wenzel, Faro, Renishaw, Innovmetric, OGP and Matrix. For the full range of our equipment, Ro-Mega Trade provides its customers with technical advice on purchase, commissioning, personal training and warranty and after-warranty services. The company was born in 2002 and has major 4 branches.
ProControl AMC
ProControl AMC is one of the trading companies dealing in the field of measuring equipments. Our company imports and distributes : the world’s fastest 2D measurement system, systems for measuring in space with sub-micron accuracy, standard Dimensional Instruments, height gauges, calibration equipments, surface roughness and hardness testers, 2D/3D optical measuring systems, 3D machines, universal testing machines and auxliary equipments.
Electroprecizia Tools Production
is a leading tool-maker company specialized in high pressure die casting tools, trimming tools, die, progressive die, plastic injection tools, control&manufacturing devices. Electroprecizia S.A. Group has a 70-year tradition in upgrading production technologies and processes specific for the electric and mechanic industry.
Renishaw (Cisimpex)
Renishaw is a global company with core skills in measurement, motion control, healthcare, spectroscopy and manufacturing. The company supplies products and services used in applications as diverse as jet engine and wind turbine manufacturing, through to dentistry and brain surgery. It is also a world leader in the field of additive manufacturing (metal 3D printing), where it is the only UK business that designs and makes industrial machines which ‘print' parts from metal powder.
CCL Design Hungary
CCL Design Hungary is offering product identification and marking solutions for the automotive and electronic industry mainly. For 20 years on the Hungarian market with global corporate background and extensive market and industry knowledge we are producing self-adhesive durable labels with high added value for the automotive industry. We also represent Automator SRL, producing direct/permanent marking equipments for every surface practically.
3D Microsurf
3D Microsurf is the romanian company who represent COORD3 Metrology, one of the biggest world producer in Coordonates Measuring Machines and Renishaw, world leader in CMM probes, software and retrofits- in Romania. We have a team of engineers with over 20 years of experience in the field of 3D control machines, surface and form measuring equipments and we are ready to meet with you to analyze the best metrology solutions tailored to your needs.
NuTechnologies is an ambitious company specialized in promoting innovative industrial equipment and services: 3D printers plastic/metal, 3D scanners, laser systems for cutting, welding, 2D and 3D marking. We are authorized technical and commercial representative for: Stratasys–World leader for professional 3D printing systems, Desktop Metal-Metal 3D printing systems, ZEISS Optotechnik–Optical 3D scanning systems, SISMA-Laser systems.
Lord Industrial Tools
Lord Industrial Tools founded in 2007, provides highly competitive industrial storage solutions, professional maintenance tools and adhesives,complete and innovative personnel hygiene solutions. Our commitment is to properly cover a complete range of products and services therefore we developed our own production capacity in metal fabrication and now we are able to provide even customized solutions regarding this area.
Courier Network
Our Next Flight Out service is what we're known for. CNW's longstanding relationships with airlines, paired with our unwavering determination and creative mindset, allow us to get your package to its destination on the fastest route possible – at a substantial cost savings.
RAAL is a manufacturer of complete cooling systems and heat exchangers made of aluminium alloys and stainless steel, in brazed construction: radiators, oil coolers, air coolers, condensers and evaporators, designed for agricultural, construction, industrial equipment and automotive applications.
Top Metrology
TOP Metrology is selling and servicing in Romania machine tools (Makino, Muratec, Axile, Microcut, Modig, Kamioka), measuring systems Nikon, laser tracker, XD Laser, swivel check, spindle analizer, ball bar API, measuring instruments Helios-Preisser, optical measuring equipment Vici Vision, measuring systems Taylor Hobson, metalographical equipment Metkon, laser marking systems Lasit, heat treatment Seco/Warwick, 3D Prodways.
Electrolytic Coating
Starting in 2013, Electrolytic Coating has established itself as one of the leading companies for surface treatment in Romania, currently supplying local and international customers. We're providing ZnNi surface treatment on metal parts for automotive industry, in both, rack and barrel technology.
is a competent partner for all projects requiring fluid technology in connection with hydraulics, electronics, systems and engineering. Hydac was founded in 1963, as a company for hydraulic accessories and today it is an internationally active company group with over 50 branch offices and 500 trade and service partners world-wide. Hydac components can be found in all areas of industrial and mobile hydraulics.
Centro Software
Centro Software is a leading Italian software house with 30 years of history and with clients all over the world, including Romania. Our ERP is multi-lingual and multi-device and the production module is our strength. The management of CMMS and the perfect integration ERP/MES, FCS, MRP and WMS are done. We are able to interconnect any machine tool and we have already carried out more than 25 special projects in the Industry 4.0 field.
Steinel Distribution
We are producers and distributors for lights and sensors, heat guns and glue guns for home and industrial use. Steinel Distribution is a subsidiary of Steinel Vertrieb Germany. We are producing in Europe in our factories, main factory is in Curtea de Arges. Steinel exists on Romanian market for 20 years.
Zaleco is a creative converter based in western Romania offering a diverse range of packaging solutions from design to mass production. The latest technologies, competitive environment and quality oriented team makes Zaleco a dedicated partner in design, die cutting and CNC routing of foams and other light materials.
Plastor are one of the most experienced plastics processors in Romania. They manufacture plastic components for automotive industry, electrical devices, medical devices, electronics etc. An important part of their business is production of winter sport equipment (ski boots, helmes, goggles). The specific tooling and devices used in production are designed and made in-house by the specialized teams of the company.
Festo is a traditional partner for the industry. We provide intelligent automation with pneumatic and electrical drive technology, as well as trainings in technical fields and engineering expertise.
Ds Smith Packaging
DS Smith is a leading provider of corrugated packaging and a specialist in plastic packaging worldwide. Over the past 80 years our organisation has grown dramatically, as have our services and areas of expertise. We have gone from being a leader in manufactured packaging with divisions in paper, plastics, packaging and recycling to become one unified company and the industry benchmark in packaging and Supply Cycle strategy.
Componente Auto
Having over 40 years experience in the automotive industry, the company Componente Auto S.A. (CAT GROUP member) recommends itself as a reliable partner both for the original equipment (OE) and for the spare parts. Our main products are steering tie rods, rod ends, inner ball joints, connecting rods, suspension ball joints, anti-roll bars, nipple oil filters. We permanently focus on our technology innovation and on insuring the quality of our products at the highest international standards IATF 16949:2016, ISO 14001:2015, ISO 18001:2007 and ISO 9001:2015.
Vicor Corporation designs, develops, manufactures and markets modular power components and complete power systems based upon a portfolio of patented technologies. Headquartered in Andover, Massachusetts, Vicor’s products are powering the 48V revolution in high performance AI Computing and Automotive Powertrain.
Kuka Robotics
KUKA AG is an internationally active company with sales of around 3.5 billion euro. Every day, roughly 14,200 KUKA employees at our headquarters in Augsburg and around the world work to ensure that we remain one of the world’s leading suppliers of intelligent automation solutions. KUKA offers you everything from a single source: from the individual components to fully automated systems.
Hexagon Manufacturing Intelligence
Bringing metrology to manufacturers for over 200 years. The story of Hexagon Manufacturing Intelligence stretches back over 200 years and incorporates some of the biggest names in measurement and industrial metrology. This rich tapestry of experience, expertise and innovation forms a solid foundation for the development of new measurement technologies, integrated manufacturing solutions and process standards of the future.
TB&C Group
The TB&C Group is a valued development and production partner in high demand for customer-specific hybrid components, busbars and mechatronic or kinematic metal injection-molded assemblies. Our hybrid components are used across the globe in the automotive industry, the industrial sector, the field of medical technology and many more.
Arcus Air Group
Arcus-Air is a private company which has been operating for more than 45 years in the aviation industry. Our vast experience allows us to offer an excellent service to our customers, handling every detail and providing an efficient, customised service : OBC , Charter or Airfreight.
Proinvest Group
Proinvest Group is a multiproduct company, with multiple manufacturing facilities specialized in steel processing, from simple components for construction and up to tooling precision mechanical components. With over 500 dedicated employees, Proinvest Group specializes in steel processing in 2000 and currently benefits from the experience from 40 years of factory tools and components Scudas, acquired in april 2015.
iRMS Industrial Robotic Manufacturing Solutions
iRMS is a Romanian based company on a journey to create smart solutions in the Industrial Automation and engineering services in Automotive Body in White branches. We are a young dynamic team of professionals with the desire to create innovative automation solutions that meet the highest client expectations, having a clear mindset to promote technology at the highest extent possible and create smart solutions for the Industry sector of tomorrow.
Chemical Company
Chemical Company is national leader in the R&D and production of high purity organic and inorganic chemicals with experience in the chemical industry. Our products and services portfolio is focused on flexibility and ability to translate the technology from the laboratory to the industrial scale.
BIBUS SES provides spare parts and technical support for maintenance, overhaul, refurbishment, modernization or construction of manufacturing systems, machine tools, equipment, facilities. BIBUS SES provides complete solutions through design and construction of automated mechatronic systems for: marking, product identification, product inspection, automated manufacturing lines and systems at issue.
SMC Romania
SMC is the worldwide leading expert in pneumatics. With 12,000 basic products and over 700,000 variations SMC offers solutions from air preparation, instrumentation, through to valves, and actuators covering practically every single step in the automation process. SMC was established in 1959, in Tokyo, Japan, as a Sintered Metal Filters and filtration systems manufacturer.
Beewatec EastTrade
BeeWaTec has been expanding its market presence since it was founded in 2007. BeeWaTec’s main area of expertise is providing support along every step of the way to achieve process optimization: custom advice, engineering, delivering assembly sets and/or complete workplace systems, training sessions and workshops, right through to an international network of qualified sales and service representatives.
A renowned Portuguese tool-maker with a large experience in different industries, from automotive (exterior and interior trims, lighting, cable ducts) to the electronics and consumer goods. Key technologies are production of moulds for technically complicated parts, 2-component/bi-material injection, gas injection, water injection and blow molds. Offer of a wide range of services, what allows to find the best solution that would fit every client.
We manufacture and supply systems for controlled and precise dosing of low, medium and high viscosity fluids and pastes. Our products range from simple hand-held devices to complex integrated "in-line" 4-axis robotic systems. All our equipment is supplied directly from our facility in Kranzberg. Our highly qualified engineers and customer service team provide full support to our customers in Germany, Austria, Switzerland, Czech Republic, Romania.
Struers is the world's leading manufacturer of equipment, consumables and services for materialographic surface preparation and analysis of solid materials. Our core business is developing, manufacturing and delivering materialographic preparation solutions with focus on preparation procedures ensuring the true structure, highest reproducibility, cost-efficient preparation methods, high degree of automation for highest repeatability.
Your partner in mechanical, electrical, acoustic and dimensional measurements.
Technoplast Injection
Tecnoplast is founded in 1970, is offering service from product design to finished plastic parts,at request using also finishing technologies such as: tampo-printing,silk-printing,hot stamping,ultrasound welding,vibration welding,painting (external).We have 3 plants: in Italy, Croatia, and recently in Romania (Baia Mare).Our business segments are:automotive, household appliances, electronics.The group is certificated: ISO 9001 and IATF 16949:2016.
Effective Flux
Since several years, EFFECTIVE FLUX is involved in Romania and abroad with process improvement consulting and training for more than 180 companies, out of each 60% automotive. We led capacity increase, quality improvement or Lean deployment projects for multinational and local companies. Last 3 years, in over 300 training sessions, we had more than 5000 attendees covering Quality, Engineering, Six Sigma and other competences.
Leman Industrie
Leman Industrie is a family-owned industrial group drawing on extensive multi-technical expertise dedicated to the continuous improvement of customer satisfaction with expertise in metal stamping, deep drawing, plastic injection, plastic overmoulding, machining, assembly, wire harnesses, engineering and prototyping.
Founded in 1991 ICPEST SRL is a company that manufacture and machine parts both for automotive and aerospace industries. Supplier for Garret prototype division and partner for General Electric Aviation we cover most manufacture process with high levels of quality assurance.
Schulte & Schmidt
Since 1948 in Germany and 2007 in Romania, the family-owned company of Schulte & Schmidt, with its 4 production sites and 12 aluminium casting machines in Brasov, Romania plant, has grown into a leading manufacturer in the aluminium processing industry. All over the world our customers value the quality we offer.
IS Intelltech
We are a company based in Oradea, specialized in industrial electronic repair, automation & control deployment and servicing. our company is covering a niche regarding the maintenance of industrial electronic equipment and machine retrofitting.
Evoca Group
Evoca Group is a leading multinational company in the out-of-home coffee machine sector, providing comprehensive range of coffee machines and payment solutions for the Ho.Re.Ca, OCS and Vending markets.
Sameday Logistics
Founded in 1972, SameDayLogistics started offering OBC from 1996, which is now an integral part of transport logistics, and as additional services: Charter, Express Freight, Customs service. Headquartered near Frankfurt Airport, Europe's largest cargo airport in the heart of Europe, the company has over 40,000 successfully completed OBCs and new office branch in Otopeni Airport, Bucharest and also in USA - Chicago.
CGR Transilvania
CGR Transilvania is located in Cristian, Sibiu county and it's a plant of CGR International Group. Our production is moulding, overmoulding, stamping and assembly in mechatronic.
Dedienne Roumanie
Dedienne is specialized in manufacturing of plastic parts covering a wide spectrum of applications. Our expertise includes injection molding (technical or cosmetic parts), decoration (automatic painting line, tampo-printing, hot stamping), assembly, ultra sonic welding, machining of plastic and metal.
Blickle Romania
Blickle is the specialist in wheels and castors for every application. The company offers Swivel castors, fixed castors, heavy duty castors, light duty castors and much more. Blickle products are available everywhere the customers want them. In 17 company-own sales subsidiaries in Europe, the Americas and Asia, as well as representatives in 120 countries, trained experts ensure top customer service.
The Interroll Group is the leading global provider of material handling solutions. The company was founded in 1959 and has been listed on the SIX Swiss Exchange since 1997. Interroll provides system integrators and OEMs with a wide range of platform-based products and services in these categories: Rollers (conveyor rollers), Drives (motors and drives for conveyor systems), Conveyors & Sorters as well as Pallet & Carton Flow (flow storage systems).
Pacosar Services
Pacosar Services provides mineral filler (talc & calcium carbonate), additives and colorants for the plastic industry. If you would like to boost your productivity between 10% and 35% we recommend you our new product Rapid Inject RI600: - for PP or HDPE injection (virgin/recycled, with/without talc, glass fiber…); - 100% PP; - added between 0,5 and 3% to your raw material; - decrease the cooling time. Free test at your factory!
Doftrad is one of the main representative companies in Romania for commercial, technical and legal translations from/to 31 languages.
Bros Trading
Bros Trading is a company specialized in sourcing resources in the industrial automation sector, a dynamic and versatile dealer in supplying and distribution of the best brands.
Barum Technik
Barum Technik Company was established in 1994 and has as main fields of activity surface treatment, powder painting of metal components, cutting processes and mechanical production. Long experience in these areas, a strong flexibility to market requirements, outstanding service quality, responsibility for production activities and environmental protection through state-of-the-art equipment have made Barum Technik one of the points reference on the market.
Euro Graphica Service
Euro Graphica Service Buzau has installed several hundreds of programmers in recent years.The services offered are electrical / electronic repairs of: printing machines, guillotines, folding machines, copying frames and other printing machinery. The company has an important archive of technical documentation, electrical / electronic schemes, partly digitized by machine building printers.
Oechsler Romania
Oechsler is a worldwide one-stop-shop, offering customized solutions with plastics for high-tech products of different markets. The company’s expertise consists in development, tool making, manufacturing – injection moulding, electronics and plastics, drive technology / mechatronics, assembly, ceramics.
Tecnoservice Equipment
Tecnoservice Equipment is a reseller company of laboratory equipment in Romanian market. We are providing technical solutions, equipment and services for different industrial ranges for more than 20 years.
Marca Romania
Marca Romania is part of Marca Group, who has an experience of more than 45 years in desing, mold maker and molding. We can provide services as design and manufacture of high precision and technical plastic molds; molding of thermoplastic and thermosetting article ; overmolding; assembly; pad printing.
CTS Romania
CTS Romania was founded in 2003, specialized in liquid painting on: ABS, plastic and metal; chrome plating on ABS , ABS-PC and zinc electroplating on metal. We are ISO 9001-2015 and ISO 14001 certificated. Our company benefits by CTS France experience in matter of development and production, experience built together with our customers in 30 years of collaboration.
GMAB Consulting
A global team committed to supporting and advancing robotic automation & tooling. Our business model gives us the ability to provide our customers quality solutions with local support and leading competitive rates. From concept to delivery, our engineers and project managers collaborate with your team to understand key deliverables and meet your ever-changing needs.
Bogner Edelstahl
Bogner Edelstahl and Konigfrankstahl are two reference names in the field of metallurgical products belonging to the same group: Frankstahl and Konigstahl Holding group with more than 150 years of experience. Bogner Edelstahl is specialized in sale of special steels, tool steels, bright bars in cutted piece or commercial length and, Konigfrankstahl in sale of cold or hot finished hollow sections, seamless steel tubes, seamless cold drawn tubes.
Optiplast Consult
Optiplast Consult is an active company for injection molding processing with an experience of 8 years in this domain an very dynamic in automotive industry. We have several services to help our customers to grow or to optimize their processes!
Stainless Steel Foundry SC UPRUC TPA SRL Fagaras is specialized in producing spare parts (cast and machined) for furnances processes, petrochemical industry and rafineries, pieces made of stainless, refractory and superalloyed materials, for high temperature processes with corrosion resistance. We currently produce for OMV Petrom Rafinery, in collaboration with Kraftanlagen Romania and J. Christof.
Plast Group
Plast Group is a leading supplier of plastic components and injection moulds able to meet the requirements of the most demanding markets. We have more than 40 years of know-how and experience in injection moulding and tools manufacturing. Our mission is to Realize Unique Ideas through Group innovation approach, professional team, passionate attitude and Company values in order to develop our legacy of the family business.
SKYTEC - Tooling Experts
Skytec is specialized in the engineering and manufacturing of moulds for plastic injection. Our office and production site is located in Marinha Grande, Portugal. Our expert team, has more than 25 years experience in plastic tooling production, covering several industries such as the Automotive industry, Electronics, Packaging, Household appliances, Aeronautics, among others. We are currently exporting our expertise worldwide.
DOSS Visual Solution
With over 20 years experiences and installations based worldwide, Doss Visual Solution is one of world’s leading visual inspection system manufacturers. Our know-how and our innovative technology set us as the industry’s benchmark. We are proud to continue our mission toward the future by developing, innovating, and improving our customized solutions to meet all the needs of the producers of technical parts in automotive and other industries.
Trelleborg Sealing Solutions
Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. It's innovative solutions accelerate performance for customers in a sustainable way. Founded in 1952, Trelleborg Sealing Solutions now contains a large variety of names, such as Busak+Shamban, Dowty Automotive, Shamban and Forsheda.
ES Elektro Romania
ES ELEKTRO Romania, part of the itsme international group of companies, is among the fastest growing electrical and mechanical suppliers in Romania. Lighting Technology, Industrial Automation, Connected Business and Robotics complement the vast range of products from hundreds of brands that the company offers to the industrial market.
Gelco Prod
Gelco Prod has been specialized in metal processing since 2004. The company designs, develops and produces precision parts of different sizes and uses. For more than 15 years, Gelco Prod specialists have been working in the field of metalworking. The company customers include major companies in the food, construction, rail and car manufacturing industries.
Dourdin Romania
Dourdin Group is an expert in the design, manufacture and marketing of decorative parts and solutions.
RENEX is one of the largest and most experienced electronics companies in Poland. It has been providing modern technology for the electronics industry and related fields for 30 years. Also, RENEX is a manufacturer under the REECO brand of antistatic protection products, ESD: industrial furniture, clothing, accessories needed for this segment. We are the only CCI Training Center in Eastern Central Europe.
EuroTriade - an expert team in cross-border HR Consultancy, since 13 years operating in Romania, primarily created with a Franco-German origin and specialist support for HR decision makers in any project that is foreign to them (recruiting top / middle managers / control / operators as well as coaching and interim manager and restructuring) because we have mastered the local contingent to integrate it into your HR policies.
Debitron Termo
Problem-solving for everything to do with water from on the leading companies in the water treatment field Judo Wasseraufbereitung; Precision multivariable flowmeters for the measurement of liquid, gas, steam and energy Vortek Instruments; Instrumentation for measurement, calibration and registration of pressure, temperature, torque and force Leitenberger GmbH; Reliable, low-noise steam generators Certuss Dampfautomaten GmbH.
PQ Plast
More than Plastic Injection Molding, Automotive exterior & interior parts & components, manufactured in RO, developed in Germany. Third generation family own company with more than 50 years experience: tool shop, painting, assembly. One of the the youngest & widest range of machines in the region, robotized handling systems, partly self-developed assembly machines, surface covering with natural leather or others. Regional & asian suppliers.
Process Color Art
Process Color Art is specialized in the plastic thermoformed packaging: automotive trays, transparent boxes, blisters, plastic cylinders; cardboard packaging: rigid boxes; CNC processing.
MEPOL s.r.l. is an innovative and flexible company, which produces thermoplastic compounds and distributes plastic material throughout Italy and overseas. It has a great productive capacity, expertise and know how are the solid foundations that Mepol lies customer relationships with.
Fitart Plast Recycling
Fitart Plast Recycling, the agent of MEPOL for Romania, is a company from Timisoara, with a long activity in distribution and recycling of plastics materials.
Trigo Industry Services
Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training.
Klarwin ( Process Engineering)
Klarwin is a leading company specialized in technical consultancy, system implementation and service in the production process engineering area, with a focus on filtration, separation, purification and water treatment.
MASTER Ltd is a company, that has proven itself in the sphere of industrial automation, with activities as: manufacturing of machines and production lines for assembling of automotive components, automation of technological processes, trading resources for automation, maintenance service.
ACS Total Software
Engineering electrical or pneumatic systems for machinery and plants is super-easy with WSCAD SUITE, regardless if you are designing tooling machines, manufacturing plants, pneumatic application or maintenance activity. The complete electrical design is integrated across several engineering disciplines: electrical schematics, fluid power, cabinet design and electrical installation supported by a database of 1.3 mil parts (
Power Belt
The company Power Belt SRL was founded in 1999 with entirely private invested capital and started commercial operations on the drive belts market. Since the establishment, our product range has gradually and continuously developed so that presently we offer a wide range of mechanical drive technology products and other industrial spare parts.
Multi Development
Multitech is currently the number one provider for marking, coding and labeling solutions in Romania. Our company offers equipments, software and consumables for a wide range of industrial applications and with these new products we would like to close the circle of this manufacturing circle. Our main partners are: Videojet, Novexx, Foba Laser, Couth and Eidos.
Loncer Engeneering & Thowald Ice Cleaning
In partnership between Loncer Engeneering and Thowald ice cleaning we will present coursesdedicated to automotive industries. - plastic injection , - pneumatic, - hydraulic , team building , - dry ice blasting. Loncer Engeneering offers even tool management - Thowald ice cleaning is representing Cold Jet as authorized dealer offering sales , service and training of dry ice blasting equipment , automated blasting systems and dry ice production.
We produce a complete range of lifting and handling equipment: industrial cranes, portal cranes, platforms for good, elevators and load handling devices. We have the ability to produce various metal structures for lifting equipment, in a volume of 500 tons / month. ELMAS - the regional specialist in material handling field!
Arc Grup
Arc Grup is a producer of metallic components based in the NW of Romania. We specialize in producing parts from sheet metal and tubes using a wide range of technologies (sheet metal lasers, tube laser, punching machines, pressbrake, welding robots, etc) and coating processes (automated powder coating line, zinc plating line). Our focus is on producing high-quality parts, developing creative solutions and building lasting relations with partners.
Deveho Software Consulting
With more than 15 years of experience in Sage Business Cloud Enterprise Management (formerly Sage X3)- ERP implementation, our focus areas cover all aspects of implementing the solution.
Formel D Romania
We see ourselves as the driving force in the Automotive Service Industry.We develop leading concepts and individual, scalable solutions and leading concepts for quality assurance and process optimization along the entire automotive value chain - from development to production through to aftersales. We help our customers get vehicles and components ready for the market and make sure that service processes are implemented and optimized.
KVT-Fastening is an expert for high-quality, special fastening applications and offers engineering solutions based on the wide product portfolio of the leading manufacturers in the market.
Egetra Romania
Egetra Romania SA is part of a French origin multinational group, that offers industry-adapted contract logistics and international transport solutions. Present on the Romanian market since 1994, with offices in Bucharest, Constanta and Cluj-Napoca, the company provides the entire range of services in the logistics field (road, sea and air transport, contract logistics and customs clearance).
Gotec Rom
Gotec Rom is specialized in metal and plastic parts surface treatment and coating of rubber - metal parts with bonding agent, as well as production of blank metal parts on CNC lathe. Available surface treatment processes: - Zinc Nickel treatment on racks, with or without sealing;- Zn Ca Phosphating and Aluminium Phosphating in drums; - Degreasing: alkaline or with Per-chlor steam;- Shot blasting;- Bonding agent application.
DEKRA Certification
We are an international Certification Body, with an expertise in management systems certification, trainings and assessment services.
Noventa Romania
Noventa Romania, former Interpart Production is member of Noveta Group from Switzerland. We are producing plastic parts, tools and offer assembling of different components. Our technological park have 41 molding machines, between 35 up to 650 tones. We have our own tool workshop in house and we can produce 50 - 60 tools, per year, with different level of complexity. Noventa Romania quality system is certified according to IATF 16949:2016.
Lhom Cart
Founded in 2013, Lhom Cart provides complete HR & Business Services to Automotive Industry. We serve companies of all sizes, from start-up companies offering HR & Business Support, Administration & Payroll,Temporary Work, Recruitment and Selection, On –site HR Services, Training, to companies with extensive, complex resource and staffing needs at all levels. Starting with 2018, Lhom Cart is SR EN ISO 9001:2015 qualified.
Mold Technology
Mold Technology was founded by a team of specialists in manufacturing high precision tools. From the very beginning the company has focused in manufacturing mould tools and other high complexity tools. After few years on the market, due to its high quality products, the company managed to become a national leader in blow moulds manufacturing industry and also an important competitor in high precision injection moulds manufacturing field.
Brandl is producer of stamping tools and stamping parts.
CONDUCTIVE designs, manufactures and sells logistic products for individual industrial projects since 2003. We produce logistic trays, sell plastic containers, pallets, plastic crates (also in ESD) and certified by ISO 9001 and ISO 14001. Our company supplies several top car and electronics manufacturers. We have exports to the EU and to the USA. We exclusively represent several successful foreign producers.
Elematec is Japanese trading company with offices around the world. Elematec Czech office specializes mainly in Automotive products with this segment being 90% of total turnover. Currently we are looking for reliable suppliers of car interior decorative parts, car display components and others.
Tanatar was established in 1975. We serve the sectors of white goods and automotive, and we export 35 % of our production. 370 people are employed Tanatar. We produce fine cutting pieces, progressive pieces, transfer pieces, tandem pieces and group assembling automations of these pieces. As Tanatar, we established our 2nd factory in Eskişehir Organized Industrial Zone. Moving all our departments to the new factory including 10.500 meter square.
Linde Gaz Romania
Linde Gaz Romania stands for the leading gas company in Romania. Technology, innovation and an inventive spirit have characterised our company from the very beginning. Linde Gas has entered the Romanian gas market in 1996 by forming a joint venture with UMT. In 1998 Linde took over 100% of the shares, becoming sole partner. For the first five years of development in Romania Linde has built the filling station in Timisoara (1997).
FEV Automotive
FEV offers a variety of Engineering Solutions from Concept to Start of Production. With more than 5500 specialists, our services are integrated throughout the development cycle. We offer Consulting - Benchmark - Final Validation - Industrialization, Function Development, Support (MATLAB / Simulink), Embedded Software Development, Electrical and Electronic Integration, Electrification & Hardware, Power train Calibration, Electric&Mechanic Design.
Exact Systems
Exact Systems is a leading provider of quality control solutions, repair and sorting of parts, components and finished products for the automotive industry. The main customers of the company are providers and suppliers to the automotive industry and car manufacturers.
MNX Global Logistic
We’re backed by a network of company-owned offices and subsidiaries in North America, Europe and Asia Pacific. Together with our 2,400+ long-term service partners, we can meet your needs in over 500 cities and 190 countries across the globe. MNX’s state-of-the-art technology platforms lets you ship, manage and track your shipments in real-time. With our proprietary software you can manage and optimize your inventory and reduce cost.
We are Italian Company based in Slovakia. Our main business is DIE CASTING AND GRAVITY CASTING. We can supply raw part or machined part. Our business sector is AUTOMOTIVE, ELETTRIC MOTOR, PUMPS, GEAR MOTOR.
Profimatt is one of the main suppliers in Romania for technical training and workshop programs especially in the plastic molding domains.
Pick Up
Established in 2004 our company became Tier 1 supplier for Renault-Nissan-Dacia group in field of accessories. With big manufacturing capacities and ultimate generation of tools, we can supply plastic and stainless steel accessories. Our R&D, production and in house testing facilities guarantee high quality and feasible products for automotive industry.